Table of Contents
Advertisement
Connectivity
Infrared
Transfer data between your phone and other infrared enabled
devices using an infrared wavelength connection. You can also use
infrared connections for GSM data services, and access the Internet
and e-mail via other devices.
Note: The phone may not allow you to copy, modify, transfer or forward
some copyrighted images, ringtones or other contents.
This device contains a low power level Class 1 laser product (Infrared LED),
which will not normally harm the eyes. Though invisible to the eye, do not
point the infrared beam at anyone's eye.
Preparing for infrared connection
Place your phone and the other device within the effective range of
the infrared connection, about 20 cm.
•
Verify there are no obstructions between the two devices. Nearby
activated infrared devices may cause interference.
•
Ensure that the infrared ports of the devices point at each other.
•
On the receiving device, activate the Infrared port.
•
If the other device is a computer, you need to set up infrared
connection on the computer. For example, in Windows, select
Start > Settings > Control Panel > Options tab > Enable Infrared
Communication. For specific infrared set up instructions for your
computer's operating system, refer to the computer's online help.
Note: For Windows
to Start > Settings > Control Panel > Wireless Link. In the File Transfer tab,
check "Allow others to send files to your computer using infrared
communications".
150
®
2000 users, to enable infrared use to transfer files, go
Advertisement
Table of Contents
