Installation Of Cutter - Honda Paice Setter PS260S Operator's Manual

STOP
0
▲
I
x
A
blade
B
guard
nut
A
B
adaptor
bolt
nylon cutter

Installation of cutter

CAUTION:
Blade is sharp. Please handle carefully to avoid injury.
BLADE
1. Assemble parts in the following order:
holder A, blade, holder B, guard, fastening nut.
2. In order to lock the rotation of the spline shaft, align
the holes (x) of gear case and holder A and insert bar
wrench.
3. Rotate the blade-fastening nut with a plug box
wrench counter-clockwise until securely tightened.
(Recommended torque - 30 Newton Metres).
NYLON CUTTER
1. When fixing the nylon cutter, assemble parts in the
following order:
holder A, holder B, adaptor bolt, nylon cutter.
2. As in the case of fixing the blade, insert bar wrench to
lock the rotation of the spline shaft.
3. Rotate the nylon cutter counter-clockwise until
securely tightened.
WARNING:
Stop the engine before attaching or detaching the blade.
to avoid serious injury
to avoid serious injury
23