Short Text Messages; Setting The Phone For Text Messages; Sending A Text Message - Panasonic EB-GD92 Series Operating Instructions Manual

Short Text Messages

Short Text Messages
You can receive, display, edit and/or send short text messages, of up to 160
characters to mobile phones on the same network or any network that has a roaming
agreement.

Setting the Phone for Text Messages

Before you can send a message you must enter the Message Centre number into
Parameters (your Service Provider will supply the Message Centre number).
The Message Centre number may have been preprogrammed, on your SIM card.
Setting the Message Centre Number
1 From Idle mode press B 3163 to enter the Message Centre
menu and press B
2 Enter message centre number in international dial format – see "International
Dialling" page 6

Sending a Text Message

1 From Idle mode press B 313 to enter the
Create menu and press B
2 Enter the message (up to 160 characters) – see "Text
Entry" page 42 and press B
You will be prompted if you wish to send the message, if you
do not wish to send the message press C, the message will
be stored.
3 Press B and enter the destination phone number (or recall a number from the
Phonebook) - see "Retrieve a Number" page 11 and press B
4 Press B
5 You may be asked if you wish to have delivery confirmation, if you want
confirmation press B. If you do not, use f until
area, then press B
The default setting for delivery confirmation can be enabled/disabled using the
Report parameter in the Short Message menu.
6 Use e to select a melody type, if required, and press B
24
Hello_
T9
No is displayed in the option
Ok