Short Text Messages; Setting The Phone For Text Messages; Sending A Text Message - Panasonic EB-GD52 Operating Instructions Manual

Digital cellular telephone

Hide thumbs Also See for EB-GD52:

Table of Contents

Short Text Messages

You can receive, display, edit and/or send short text messages, of up to 160

characters to mobile phones on the same network or any network that has a roaming

agreement.

Before you can send a message you must enter the Message Centre number into

Parameters (your Service Provider will supply the Message Centre number).

The Message Centre number may have been preprogrammed, on your SIM card.

Setting the Message Centre Number

1 From Idle mode press B 363 to enter the Message Centre menu

and press B

2 Enter message centre number in international dial format – see "International

Dialling" page 6

1 From Idle mode press B 33 to enter the Create

menu and press B

2 Enter the message (up to 160 characters) – see "Text

Entry" page 36 and press B

You will be prompted if you wish to send the message, if you

do not wish to send the message press C, the message will be stored.

3 Press B and enter the destination phone number (or recall a number from the

Phonebook) - see "Retrieve a Number" page 11 and press B

4 Press B

5 You may be asked if you wish to have delivery confirmation, if you want

confirmation press B. If you do not, use f until

area, then press B

The default setting for delivery confirmation can be enabled/disabled using the

Report parameter in the Short Message menu.

6 Use e to select a melody type, if required, and press B

Short Text Messages

is displayed in the option

Table of Contents

Gd-52