Panasonic EB-GD92 Series Operating Instructions Manual page 37

Adding to Multi-party
You can add to the Multi-party call (up to a maximum of five). Either by making a call
or accepting an incoming call. The call can then be merged into the Multi-party.
Note: When making a call or accepting an incoming call the Multi-party call will be
placed on hold. The callers in the Multi-party call can continue to communicate with
each other while on hold.
Splitting a Multi-party
You can select an individual from the Multi-party and remove their connection. This
enables you to talk privately without the participation of the rest of the Multi-party.
During a Multi-party call:
1 Use f until
2 Press e to select a caller in the Multi-party
3 Press f to display
4 Press B
The selected caller will be split from the Multi-party call and the Multi-party call will be
placed on hold (the remaining Multi-party call callers can still communicate).
Ending Multi-party Calls
You can either select an individual in the Multi-party and end the call or end the entire
Multi-party call. If a call is held, or an other call is incoming then an individual call
cannot be ended.
Ending a Single Connection
During a Multi-party call
1 Press f to display
2 Press e to select a caller in the Multi-party
3 Press f to display
4 Press B
Ending a Multi-party Call
During a Multi-party call:
Press E to end all the calls at once
is displayed in the option area and press B
Option
Split in the option area
in the option area and press B
Option
End in the option area
Advanced Operation
33