Setting The Alarm; Muting The Alarm - Panasonic EB-GD92 Series Operating Instructions Manual

Setting the Alarm

If you have not already set the clock, you will be prompted to do so prior to setting the
alarm.
There are four separate alarms, each of which may be set independently.
1 From Idle mode press B 413 to enter the
Alarm Set menu and press B
2 Use e to select the alarm to be set and press B
3 Enter the digits for the time and press B
4 Use e to select the frequency of the alarm and press
B
5 Use e to select the ring type and press B
Once the alarm has been set, ? will be displayed in the information area when the
phone is in Idle mode.
The alarm is activated in accordance with the current clock (Home or Visitor)

Muting the Alarm

When the set time is reached the alarm will sound and the display will flash with an
alarm message. The alarm will sound for 30 seconds. If the alarm is due during a call,
it will activate vibration alert.
To end the alarm:
Press any key
Disabling the Alarm
1 From Idle mode press B 413 to enter the Alarm Set menu and
press B
2 Use e to select the alarm to be disabled and press B twice
3 Use e until Disabled is displayed and press B
Once disabled, following the same procedure will re-enable the alarm.
Adjusting the Alarm Time
1 From Idle mode press B 413 to enter the Alarm Set menu and
press B
2 Use e to select the alarm to be adjusted and press B
3 Press and hold C to remove the current alarm time
4 Enter the digits for the time and press B
5 Press e to select the frequency of the alarm and press B
6 Use e to select the ring type and press B
Applications
Alarm:
Repeat Daily
Ok
21