Dtmf Tones; Note Pad - Panasonic EB-GD92 Series Operating Instructions Manual

Additional Features

DTMF Tones

DTMF tones can be sent during conversation. These are often used to access voice
mail, paging and computerized home banking. For example, you may need to input a
number to remotely access voice mail messages. A phone number may be stored in
the Phonebook with DTMF tones, allowing the number to be dialled upon recall and
the DTMF number to be sent automatically.
Send DTMF Tones During a Call
Enter digits (0 to 9, # and *)
Pause Dial
Using pauses allows you to send DTMF tones automatically.
1 Enter phone number
2 Press and hold 0 until a P is displayed
3 Enter DTMF digits after the pause, e.g. enter the number
to access voice mail messages.
4 Press D
When the call is successful DTMF tones will be sent after 3
seconds or when D is pressed.
If the DTMF tones are unsuccessful then the destination of your call may require that
the length of the tones be increased.
1 From Idle mode press B 56 to enter the DTMF Length menu
2 Use e to set to Long and press B

Note Pad

During a call you can enter numbers which you may wish to dial when the call has
ended.
During a call:
1 Enter phone number
2 When the call has ended press D to call that number
To store in Phonebook, press A while the number is displayed – see "Store a
Number" page 10.
40
+01234P6
Menu