Locking The Phone; Using The Pin - Panasonic EB-GD92 Series Operating Instructions Manual

Basic Operation

Locking the Phone

With the Phone Lock enabled you will be restricted to answer incoming calls and
make emergency calls only. The Phone Lock Code is factory set to "0000".
1 From Idle mode press B 81 to enter the Phone
Lock menu
2 Press B
3 Enter the 4-digit code and press B
The phone will be locked and the lock icon (O) will be
displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code and press B. The lock icon will
be removed from the display. However, once you turn the phone off and on again you
will need to re-enter the Lock Code, and when the correct code has been entered
will be displayed. Press B.
Disabling Phone Lock
1 From Idle mode press B 8 to enter the Security menu.
2 Press f until
3 Press B
4 Enter the Lock Code and press B

Using the PIN

The PIN (Personal Identification Number) protects your SIM against unauthorized
use. If you enable the PIN, every time the phone is turned on you will be prompted to
enter the PIN.
The PIN2 controls security for the Fixed Dial Store and Call Charge metering.
Enabling/Disabling the PIN
1 From Idle mode press B 83 to enter the PIN menu
2 Press B to enable/disable the PIN
3 Enter PIN number B
8
Disable is displayed in the option area
Phone Lock
Enabled
Ok