Earpiece Volume Control; Locking The Phone; Using The Pin - Panasonic EB-GD75 Operating Instructions Manual

Earpiece Volume Control

The volume level may be adjusted during a call:
Use a to decrease the volume, use b to increase the volume
Note: Volume control for Personal Handsfree accessory is adjusted in the
same manner.

Locking the Phone

With the Phone Lock enabled you will be restricted
to answer incoming calls and make emergency calls
only. The Phone Lock Code is factory set to "0000".
1 From Idle Z Q , select Phone Menu
> Security > Phone Lock Z Q
2 Select Enable Z Q
3 Enter the 4-digit code, Z Q
The phone will be locked and the lock icon ( O ) will
be displayed.
Unlocking the Phone
To restore normal operation, enter your Lock Code Z Q . The lock
icon will be removed from the display. However, once you turn the phone
off and on again the Lock Code will need to be re-entered. When the
correct code has been entered Z Q .
Disabling Phone Lock
The phone must be unlocked before the phone lock can be disabled.
1 From Idle Z Q , select Phone Menu > Security > Phone
Lock Z Q
2 Select Disable Z Q
3 Enter the 4-digit code Z Q

Using the PIN

The PIN (Personal Identification Number) protects your SIM against
unauthorized use. If you enable the PIN, every time the phone is turned on
you will be prompted to enter the PIN.
The PIN2 controls security for the Fixed Dial Store, Call Charge metering
and Barred Dial.
Basic Operation
10