Advertisement
from 1-255. Once the address has been selected, press the ENTER button
to confirm. To go back to the functions without any changes press the
MENU button again. Press and hold the MENU button for one second or
wait for one minute to go back to the main menu.
Master Mode or
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(Slave 1),
(Slave 2) or
has been selected, press the ENTER button to confirm. To go back to the
functions without any changes press the MENU button again. Press and
hold the MENU button for one second or wait for one minute to go back to
the main menu.
Show Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(show 1) or
(show 2) or
Once the mode has been selected, press the ENTER button to confirm. To
go back to the functions without any changes press the MENU button
again. Press and hold the MENU button for one second or wait for one
minute to go back to the main menu.
Sound Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
(sound on) or
(sound off) mode. Once the mode has been selected,
press the ENTER button to confirm. To go back to the functions without
any changes press the MENU button again. Press and hold the MENU
button for one second or wait for one minute to go back to the main menu.
Slave Mode
. Press the ENTER button and the
(Master) mode. Once the mode
. Press the ENTER button and the
(show 3) or
(show 4) mode.
. Press the ENTER button and the
Sound Sensitivity
Press the MENU and use UP and DOWN button to select
the sound sensitivity between value 0 and 255. Press the ENTER button
for confirmation after value selection. To go back to the functions without
any changes press the MENU button again.
Blackout Mode
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
blackout) or
(no blackout) mode. Once the mode has been
selected, press the ENTER button to confirm. To go back to the functions
without any changes press the MENU button again. Press and hold the
MENU button for one second or wait for one minute to go back to the main
menu.
Led Display
Press the MENU button to select
display will blink. Use the DOWN and UP buttons to select the
display on) or
(Led display off) mode. Once the mode has been
selected, press the ENTER button to confirm. To go back to the functions
without any changes press the MENU button again. Press and hold the
MENU button for one second or wait for one minute to go back to the main
menu.
Dimmer Calibrate
Press the MENU button to select
confirm, the current mode will blink. Use the DOWN and UP buttons to
select Red/ Green/Blue. Once the mode has been selected, press the
ENTER button to setup. Use the DOWN and UP buttons to change the
value (125~255). Once the mode has been selected, press the ENTER
and select
. Press the ENTER button and the
(yes
. Press the ENTER button and the
(Led
. Press the ENTER button to
Hide quick links:
Advertisement
