ECTIVE CSI30 Installation And Operating Instructions Manual page 52

[ ]
ECTIVE SINUS/SINE INVERTER – CSI-/SSI-SERIES
®
• Always start with connecting the input voltage and switch the inverter on afterwards .
• Do not install near heat sources or in direct sunlight .
• Avoid dust, humidity and flammable or caustic substances near the inverter .
• The inverter heats up during operation, keep away from heat-sensitive materials .
• Do not drop the inverter and avoid shocks .
• Do not place any objects on top of the inverter .
• Only use all of the original cables delivered with the device .
• Do not open the device .
• Only use dry wipes for cleaning . Switch off the inverter before cleaning .
• Switch of the inverter before all kinds of work .
• In case of sharp-edged ducts please use an empty conduit or cable bushing .
• Do not use the same duct for the 230 V output cable and the DC cable .
• Only use the device if the inverter is without any damage .
• Do not cover the ventilation slits .
• The power supply must be switched off before handling the device .
50