ECTIVE CSI30 Installation And Operating Instructions Manual page 50

☝
Please note!
Please mind the starting current!
Keep in mind that inductive devices (for example power drills or refrigerators etc .) often
need a 3–10 times higher power at the beginning than indicated on the descriptive
type plate . The maximum power of this short period should not surpass the maximum
power of the inverter .
☝
Please note!
Listen to the acoustic signal!
In case of overload an acoustic signal will sound . If the needed power is not reduced to
the maximal continuous output, the inverter will shut down automatically .
☝
Please note!
Output losses because of heat
An ambient temperature over 40°C (for ex . due to heat at the installation site or direct
sunlight) can lower the specified output and efficiency .
48
[
ECTIVE SINUS/SINE INVERTER – CSI-/SSI-SERIES
®
]