HP ProLiant DL360e Generation 8 Quickspecs page 51

QuickSpecs
Additional Options
HP USB and SD Options
optional. To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative. Caution: HP
recommends that a minimum of two people is required for all Rack Server installations.
Please refer to your installation instructions for proper tools and number of people to
use for any installation.
HP 1U Small Form Factor Easy Install Rail Kit
NOTE: For SFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the
rails are installed the server is aligned with the rails and slid into the rack. The HP 1U
Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Large Form Factor Easy Install Rail Kit
NOTE: For LFF models.
NOTE: Kit contains full extension rails which do allow for in rack serviceability. After the
rails are installed the server is aligned with the rails and slid into the rack. The HP 1U
Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 1U Cable Management Arm for Easy Install Rail Kit
NOTE: Supports Easy Install rail kits only
NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction
Rails. To assist in the installation of the server into the rack an optional installation tool
is available by contacting your local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all Rack Server
installations. Please refer to your installation instructions for proper tools and number
of people to use for any installation.
HP 2GB USB Flash Media Drive Key Kit
NOTE: HP qualified blank USB key for use with HP ProLiant servers that support the
VMware virtualization environment and other HP value-add software. HP recommends
this industry standard USB flash device for use with VMware ESXi. USB device must be
installed in the internal slot of the ProLiant server for use with VMware ESXi. Refer to
HP VMware Getting Started Guide for installation instructions.
HP 8GB SD Enterprise Mainstream Flash Media Kit
HP 32GB SD Enterprise Mainstream Flash Media Kit
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13971_na/13971_na.html
HP USB BFR with PVC Free Intl Keyboard/Mouse Kit
DA - 14327 North America — Version 36 — January 22, 2014
HP ProLiant DL360e Generation 8 (Gen8)
734807-B21
734809-B21
734811-B21
608447-B21
726113-B21
700136-B21
672097-B33
Page 51