HP ProLiant DL360e Generation 8 Quickspecs page 19

QuickSpecs
Pre-configured Models
HP ProLiant DL360e Gen8
E5-2403v2 1P 4GB-R
B320i Hot Plug SAS 8 SFF
460W PS Svr
747089-001
Entry Models - SATA
HP ProLiant DL360e Gen8
E5-2403 1P 4GB-R Hot
Plug 4 LFF 460W PS Entry
Svr
668812-001
Processor
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Power Supply
Fans
Form Factor
Warranty
Processor
Cache Memory
Memory
Network Controller
Storage Controller
Hard Drive
Internal Storage
Power Supply
Fans
Form Factor
DA - 14327 North America — Version 36 — January 22, 2014
HP ProLiant DL360e Generation 8 (Gen8)
(1) Intel® Xeon® E5-2403v2 (1.8GHz/4-core/10MB/80W, DDR3-1333066)
Processor
10MB (1x10MB) L3 cache
4GB (1x4GB) DDR3 RDIMM PC3L-12800R (1600MHz)
NOTE: Memory runs at 1333MHz speed due to processor.
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B320i Controller
NOTE: Provides support for up to 8 SAS or SATA drives and includes SAS
license key (PN BC393A).
None ship standard; includes 7 SFF hard drive blanks
8 SFF HDD Bays
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
Rack (1U)
NOTE: Includes the Easy Install Rail kit which does allow for in-rack
serviceability. The Easy Install Cable Management Arm is optional.
Caution: HP recommends that a minimum of two people are required for all
Rack Server installations. Please refer to your installation instructions for
proper tools and number of people to use for any installation.
Server Warranty includes 3-Year Parts, 1-Year Labor, 1-Year Onsite support
with next business day response.
(1) Intel® Xeon® E5-2403 (1.8GHz/4-core/10MB/80W, DDR3-1066) Processor
10MB (1 x 10MB) L3 cache
4GB (1 x 4GB) Registered DIMMs PC3L-10600R (1333MHz)
NOTE: Memory runs at 1066MHz speed due to processor.
HP Ethernet 1Gb 4-port 366i Adapter
HP Dynamic Smart Array B120i Controller
NOTE: Provides data transmission speeds up to 3Gb/s
None ship standard; includes 3 LFF hard drive blanks
4 LFF HDD Bays
(1) HP 460W CS Gold Hot Plug Power Supply (92% Efficient)
4 Hot-Plug Non-redundant Fans
Rack (1U)
NOTE: Includes Rack Mounting Gen8 non-telescoping Friction Rail Kit which
does not allow for in rack serviceability. The HP 1U Gen8 Cable Management
Arm is not available when using Friction Rails. To assist in the installation of
the server into the rack an optional installation tool is available by contacting
your local services representative (p/n 695539-001). Caution: HP recommends
that a minimum of two people is required for all Rack Server installations.
Please refer to your installation instructions for proper tools and number of
people to use for any installation.
Page 19