Table of Contents
Advertisement
QuickSpecs
Additional Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13731_na/13731_na.html
HP Server Console Switches
HP Server Console 0x2x8 Port Analog Switch
HP Server Console 0x2x16 Port Analog Switch
HP TAA 0x2x16xKVM Server Console G2 Switch
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/11834_na/11834_na.html
HP Server Console Switch G2 with Virtual Media & CAC
HP 0x2x16 KVM Server Console Switch G2 with Virtual Media CAC Software
HP 0x2x32 KVM Server Console Switch G2 with Virtual Media CAC Software
HP KVM CAT5 1-pack USB Interface Adapter
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_na/13475_na.html
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_na/13474_na.html
Rail Kits
HP 1U Small Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For SFF models.
NOTE: Includes Rack Mounting Gen8 telescoping SFF Ball Bearing Rail Kit which does
allow for in rack serviceability. Due to the size and weight of the server two people are
required to insall the server into the rack. The HP 1U Gen8 Cable Management Arm is
optional. To assist in the installation of the server into the rack an optional installation
tool is available by contacting your local services representative. Caution: HP
recommends that a minimum of two people is required for all Rack Server installations.
Please refer to your installation instructions for proper tools and number of people to
use for any installation.
HP 1U Cable Management Arm for Ball Bearing Gen8 Rail Kit
NOTE: Supports Ball Bearing rail kit only.
HP Rack Cable Management Velcro Clips
HP 1U Large Form Factor Ball Bearing Gen8 Rail Kit
NOTE: For LFF models.
NOTE: Includes Rack Mounting Gen8 telescoping LFF Ball Bearing Rail Kit which does
allow for in rack serviceability. Due to the size and weight of the server two people are
required to install the server into the rack. The HP 1U Gen8 Cable Management Arm is
DA - 14327 North America — Version 36 — January 22, 2014
HP ProLiant DL360e Generation 8 (Gen8)
AF616A
AF617A
AF626A
AF618A
AF619A
336047-B21
AF611A
AF620A
AF621A
AF622A
663201-B21
663203-B21
379820-B21
663202-B21
Page 50
Advertisement
Table of Contents
