Equalizer Control - Kenwood DNX893S Quick Start Manual

Controlling Audio

Equalizer Control

You can adjust equalizer by selecting the
optimized setting for each category.
1
Press the
volume knob.
Popup menu appears.
2
Touch [Audio].
Audio screen appears.
3
Touch [Equalizer].
Equalizer screen appears.
4
Touch the screen and set the Graphic
Equalizer as desired.
Gain level (light green boxed area)
Adjust the gain level by touching the each
frequency bar.
You can select frequency bar and adjust its
level by [R], [S].
Preset Select
Displays the screen to recall the preset
equalizer curve.
94 94
<MENU> button/
Memory
Saves the adjusted equalizer curve to "User1"
to "User4".
Initialize
The current EQ curve returns to flat.
ALL SRC
Apply the adjusted equalizer to all sources.
Touch [ALL SRC] and then touch [OK] on the
confirmation screen.
Bass EXT (Bass Extend Settings)
When turned on, the frequency lower than
62.5 Hz is set to the same gain level as 62.5 Hz.
SW Level
Adjusts the subwoofer volume. This setting is
not available when subwoofer is set to "None".
Speaker/ X'over setup
See
Recall the EQ curve
1
Touch [Preset Select].
2
Select EQ curve.
NOTE
• [iPod] is available only during iPod source.
(P.90).