Setup - Samsung SCD-2081 User Manual

WHITe bAl (WHITe bAlANCe)
Use the White Balance function to adjust the screen color.
When the SETUP menu screen is displayed, select 'White Bal.' by using the
1.
Function Setup switch so that the arrow
indicates 'White Bal.'.
2. Select a desired mode using the Function
Setup switch.
※ Select one of the following 5 modes, as
appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700°K and 11,000°K.

OUTDOOR : Select this when the color temperature is between 1,700°K and

11,000°K.(sodium light inclusion)
Select this When the color temperature of environment surrounding
the subject is out of the control range (e.g. clear sky, or sunset)
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.

mANUAl : Select this to fine-tune White

Balance manually. Set White
Balance first by using the ATW
or AWC mode. After that switch
to MANUAL mode, fine-tune the
White Balance and then press the
Function Setup switch.
AWC → seT : To find the optimal luminance level for the current environment,

point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
White Balance may not work properly under the following conditions. In this case select the AWC
mode.
➊ When the color temperature of the environment surrounding the subject is out of
the control range (e.g. clear sky or sunset).
➋ W hen the ambient illumination of the subject is dim.
➌ If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
MAIN SETUP
1.LENS
2.EXPOSURE
3.
SSDR
▶ 4. WHITE BAL
WB MANUAL
▶ RED GAIN IIIIIIIIIIIIII  IIIIIIIIIIIIII
BLUE GAIN IIIIIIIIIIIIII  IIIIIIIIIIIIII
Press SET to Return
DC
OFF
ATW
247
236
English_23