Connection - Samsung SCD-2081 User Manual

connection

CONNeCTING TO mONITOR
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
As the connecting method varies with the instruments, refer to the manual supplied

with the instrument.
Only connect the cable when the power is turned off.

If necessary, you can connect the monitor to the REMOTE jack on the back of your

camera.
CONNeCTING TO pOWeR
Connect the adaptor to the power input connector as shown in the figure below.
The recommended adaptor specifcation for SCD-2081N/2081P is DC 12V / 500mA or AC 24V /
300mA.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size
(AWG)
Resistance (Ω/m)
Voltage Drop (V/m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore use of

an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
CCTV Camera
2
#24 (0.22mm ) #22 (0.33mm
0.078
0.028
---- Power Input
Terminal
2
) #20 (0.52mm
0.050 0.030
0.018 0.011
Monitor
2 2
) #18 (0.83mm )
0.018
0.006
English_1