Workgroup Bridge Transmit/Receive - Cisco WAP551 Administration Manual

Status and Statistics

WorkGroup Bridge Transmit/Receive

WorkGroup Bridge Transmit/Receive
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
• Total Packets—The total packets sent (in Transmit table) or received (in Received
table) by this WAP device.
• Total Bytes—The total bytes sent (in Transmit table) or received (in Received table) by
this WAP device.
• Total Dropped Packets—The total number of dropped packets sent (in Transmit table)
or received (in Received table) by this WAP device.
• Total Dropped Bytes—The total number of dropped bytes sent (in Transmit table) or
received (in Received table) by this WAP device.
• Errors—The total number of errors related to sending and receiving data on this WAP
device.
You can click Refresh to refresh the screen and show the most current information.
The WorkGroup Bridge Transmit/Receive page shows packet and byte counts for traffic
between stations on a WorkGroup Bridge. For information on configuring WorkGroup
Bridges, see WorkGroup
To show the WorkGroup Bridge Transmit/Receive page, select Status and Statistics >
WorkGroup Bridge in the navigation pane.
Workgroup Bridge Transmit/Receive
Each network interface that is configured as a WorkGroup Bridge interface shows these fields:
• Network Interface—Name of the Ethernet or VAP interface. On WAP561 devices,
WLAN0 represents radio 1 and WLAN1 represents radio 2.
• Status and Statistics—Whether the interface is disconnected or is administratively
configured as up or down.
Bridge.
2
19