Cisco WAP551 Administration Manual page 202

Single Point Setup
Single Point Setup Overview
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
• If the loss of contact with the cluster is due to a physical or logical disconnect with the
LAN infrastructure, network services out to the wireless clients may be impacted
depending on the nature of the failure.
Propagation of Configuration Settings and Parameters in Single Point
Setup
The tables summarize configurations that are shared and propagated among all clustered WAP
devices.
Configuration Parameters Propagated and Not Propagated to Single Point Setup Access Points
Common Configuration Settings and Parameters that are Propagated in Single Point Setup
Captive Portal
Client QoS
Email Alert
HTTP/HTTPs Service (Except SSL Certificate
Configuration)
Log Settings
MAC Filtering
Management Access Control
Networks
Time Settings
Radio Configuration Settings and Parameters that are Propagated in Single Point Setup
Mode
Fragmentation Threshold
RTS Threshold
Rate Sets
Primary Channel
Password Complexity
User Accounts
QoS
Radio Settings Including TSpec
Settings (Some exceptions)
Rogue AP Detection
Scheduler
SNMP General and SNMPv3
WPA-PSK Complexity
10
155