Cisco WAP551 Administration Manual page 85

LAN
IPv6 Addresses
STEP 1
STEP 2
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
To configure IPv6 address settings:
Select LAN > IPv6 Addresses in the navigation area.
IPv6 Addresses
Configure the following settings:
• IPv6 Connection Type—Choose how the WAP device obtains an IPv6 address:
- DHCPv6—The IPv6 address is assigned by a DHCPv6 server.
- Static IPv6—You manually configure the IPv6 address. The IPv6 address should be
in a form similar to xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx
(2001:DB8::CAD5:7D91).
• IPv6 Administration Mode—Enables IPv6 management access.
• IPv6 Auto Configuration Administration Mode—Enables IPv6 automatic address
configuration on the WAP device.
When enabled, the WAP device learns its IPv6 addresses and gateway by processing the
Router Advertisements received on the LAN port. The WAP device can have multiple
autoconfigured IPv6 addresses.
• Static IPv6 Address—The static IPv6 address. The WAP device can have a static IPv6
address even if addresses have already been configured automatically.
4
56