Cisco WAP551 Administration Manual page 195

Captive Portal
Local Users
STEP 3
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
Additional fields appear to configure the user.
Local Users—Modify
Enter the parameters:
• User Password—Enter the password, from 8 to 64 alphanumeric and special characters.
A user enter must enter the password to log into the network through the Captive Portal.
• Show Password as Clear Text—When enabled, the text you type is visible. When
disabled, the text is not masked as you enter it.
• Away Timeout—The period of time a user remains in the CP authenticated client list
after the client disassociates from the AP. If the time specified in this field expires before
the client attempts to reauthenticate, the client entry is removed from the authenticated
client list. The range is from 0 to 1440 minutes. The default value is 60. The timeout
value configured here has precedence over the value configured for the captive portal
instance, unless the user value is set to 0. When set to 0, the timeout value configured
for the CP instance is used.
• Group Name—The assigned user group. Each CP instance is configured to support a
particular group of users.
• Maximum Bandwidth Up—The maximum upload speed, in megabits per second, that
a client can transmit traffic when using the captive portal. This setting limits the
bandwidth used to send data into the network. The range is from 0 to 300 Mbps. The
default is 0.
9
154