Traffic Statistics; Workgroup Bridge Transmit/Receive - Cisco WAP371 Administration Manual

Cisco wireless-ac/n dual radio access point with single point setup
Hide thumbs Also See for WAP371:
Table of Contents

Advertisement

Status and Statistics

Traffic Statistics

Traffic Statistics

WorkGroup Bridge Transmit/Receive

Cisco Small Business WAP371 Wireless Access Point Administration Guide
Use the Traffic Statistics page to view basic information about the WAP. It also provides a
real-time display of transmit and receive statistics for the Ethernet interface, the Virtual Access
Points (VAPs), and any WDS interfaces. All transmit and receive statistics reflect the totals
since the WAP was last started. If you reboot the WAP, these figures indicate transmit and
receive totals since the reboot.
To show the Traffic Statistics page, select Status and Statistics > Traffic Statistics in the
navigation pane.
The Traffic Statistics page shows summary data and statistics for traffic in each direction.
Network Interface—Name of the Ethernet interface and each VAP and WDS interface.
WLAN0 and WLAN1 precede the VAP interface name to indicate the radio interface
(WLAN0 represents radio 1 and WLAN1 represents radio 2).
Total Packets—The total packets sent (in Transmit table) or received (in Received
table) by this WAP device.
Total Bytes—The total bytes sent (in Transmit table) or received (in Received table) by
this WAP device.
Total Dropped Packets—The total number of dropped packets sent (in Transmit table)
or received (in Received table) by this WAP device.
Total Dropped Bytes—The total number of dropped bytes sent (in Transmit table) or
received (in Received table) by this WAP device.
Errors—The total number of errors related to sending and receiving data on this WAP
device.
You can click Refresh to refresh the screen and show the most current information.
The WorkGroup Bridge Transmit/Receive page shows packet and byte counts for traffic
between stations on a WorkGroup Bridge. For information on configuring WorkGroup
Bridges, see
WorkGroup
To show the WorkGroup Bridge Transmit/Receive page, select Status and Statistics >
WorkGroup Bridge in the navigation pane.
Each network interface that is configured as a WorkGroup Bridge interface shows these fields:
Bridge.
2
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents