Before First Use; Daily Use; Loading The Laundry - Electrolux EWF14023 User Manual

14 www.electrolux.com
To restart the program from the point at
which it was interrupted, press this
touchpad again, the Start/Pause pilot
light will stop flashing.
● Add Clothes (
While running a program, you may add
clothes by:
4.

BEFORE FIRST USE

NOTE
During installation or before first use you
may observe some water in the machine.
This is a residual water left in the
machine after a full functional test in the
factory to ensure the machine is
delivered to customers in perfect working
order and is no cause for concern.
1. Ensure that the electrical and water
connections comply with the
installation instructions.
5.

DAILY USE

5.1 Loading The Laundry

1.
Turn the water tap on.
2.
Connect the main plug to the main
socket.
3. Press the On/Off button to turn on the
washing machine. Turn the knob to
set a program. The washing machine
will propose a temperature and
automatically select the spin value
provided for the program you have
chosen.
The selector knob can be turned either
clockwise or counter-clockwise.
4. Check and remove objects (if there
are any) that could be trapped in the
fold.
)
You can only add clothes if
"Start/Pause" pilot light is lit.
- Pressing the "Start/Pause" touchpad
to pause the program.
Wait for the machine to come to a
-
complete stop before opening the
door.
- Add clothing and close the door.
- Resume the program by pressing
"Start/Pause" touchpad again.
2. Put 2 litres of water in the detergent
compartment for washing phase. This
activates the drain system.
3. Select a Cottons cycle at 90 °C, without
any laundry in the machine, to remove
any manufacturing residue from the
drum and tub then start the machine.
5. Place the laundry in the drum, one
item at a time, shaking them out as
much as possible. (Refer to page 18
"WASHING HINTS")
6. Close the door.
CAUTION
Make sure
that no
laundry
remains
between the
seal and the door.