Switching Temporarily To A Program Of Your Choice Automatically; Searching For Programs Using Pty Codes; (Pty Search) - JVC UX-E8DAB Instructions Manual

Switching Temporarily to
a Program of Your Choice
Automatically
The Enhanced Other Networks function allows the System
to switch temporarily to a station/service broadcasting a
program of your choice (TA, NEWS, or INFO).
• While you are listening to an FM station, the System can
switch to one of the preset FM stations.
• While you are listening to a DAB service, the System can
switch to another DAB service.
• This function works only while listening to a station/
service which provides the required signals.
Press repeatedly to select the program type:
(Canceled)
TA Traffic announcement in your area
NEWS News
INFO Information
How the Enhanced Other Networks function works:
Case 1
If no station/service is broadcasting the program of
your choice
The System continues tuning in to the current station/
service.
\ When a station/service starts broadcasting the
program of your choice, the System automatically
switches to that station/service.
The PTY code indicator starts flashing.
\ When the program is over, the System goes back
to the previously tuned station/service, but the
function still remains active (the indicator stops
flashing and remains lit).
Case 2
If a station/service is broadcasting the program of
your choice
The System automatically switches to the station/
service. The PTY code indicator starts flashing.
\ When the program is over, the System goes back
to the previously tuned station/service, but the
function still remains active (the indicator stops
flashing and remains lit).
Case 3
If the station/service currently tuned in is
broadcasting the program of your choice
The PTY code indicator starts flashing.
\ When the program is over, the indicator stops
flashing (the function still remains active).
Searching for Programs Using PTY
Codes (PTY Search)
While listening to an FM station:
You can locate a particular kind of program from the 30
preset stations (see page 11) by specifying a PTY code.
While listening to a DAB service:
You can locate a particular kind of program from among
all the services you can receive by specifying a PTY code.
• For details about PTY codes, see page 20.
Press to enter the PTY code setting
mode.
1
"PTY" and "SELECT" appear
alternately on the main display.
2
Select a PTY code.
or
The System starts searching for a
3
program of the selected type. One is
tuned in when found.
NOTES
• To stop at any time during the search, press PTY
SEARCH.
• To continue searching after it has stopped on an
unwanted program, press PTY SEARCH again while the
PTY code is flashing on the display.
• If no program is found, "NOTFOUND" appears on the
display.
12