Table of Contents
Advertisement
Preparation (Bluetooth Audio)
Perform electrical wiring for CY-BT200U (this unit) and
install it.
(\
page 26, 27) Refer to the individual instructions
for the devices to be connected as well.
q
Items for preparation
¡
CY-BT200U (this unit)
¡
Bluetooth-ready audio device
Note: For the models to be supported, visit the Web Site at:
http://www.panasonic.com (Refer to the description regarding
Car Audio/AV.)
We do not guarantee that all the functions of this unit are
available on all of the Bluetooth-ready devices.
¡
Head unit
The models to be supported are shown below as of December
2007.
CQ-VX100U/CQ-VW100U, CQ-RX400U/CQ-RX200U
18
w
Pairing
This unit should register the Bluetooth-ready device to be cou-
pled before using.
Pairing establishment is performed on the menu screen of the
head unit. Refer to the Operating Instructions of the head unit for
further information.
Note:
¡
If another device is already registered, deletion of the regis-
tered data for the device is required in advance. Refer to the
Operating Instructions of the head unit for further information.
¡
Only the latest paired the Bluetooth-ready is usable.
¡
This unit is displayed as "Panasonic BT200" on the screen of
the Bluetooth-ready device.
¡
If the displayed device is different from the connected device,
the pairing is not successfully completed. Try to establish the
pairing again.
¡
Once pairing is established, this operation is not required until
replacing the Bluetooth-ready device with another Bluetooth-
ready device.
e
Volume adjustment
(head unit)
Advertisement
Table of Contents
