CY-BT200U CY-BT200U ¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference. ¡Prière de lire attentivement ces instructions (y compris la “Garantie limitée” et le “Répertoire des services à la clientèle”) avant d’utiliser ce produit et conserver ce mode d’emploi pour s’y référer ultérieurement.
They contain instructions about how to use the sys- tem in a safe and effective manner. Panasonic assumes no responsibility for any problems resulting from failure to observe the instructions given in this manual.
Do not disassemble, modify the unit or attempt to repair the product yourself. If the product needs to be repaired, consult your dealer or an authorized Panasonic Servicenter. ❑ Do not use the unit when it is out of order.
Safety Information Warning ❑ Check for piping, gasoline tank, electric wiring, and other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gaso- line tank, and electric wiring are located.
Installation of this unit requires special skills and experience. For maximum safety, have it installed by your dealer. Panasonic is not liable for any problems resulting from your own installation of the unit. ❑ Follow the instructions to install and wire the prod- uct.
Safety Information Caution ❑ Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury. ❑...
The following applies only in the U.S.A. Part 15 of the FCC Rules FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's authority to operate this device. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases: Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: email@example.com You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9 am to 8 pm, EST.)
(905) 624-5505 1-800 #: 1-800-561-5505 Fax #: (905) 238-2360 Email link: “Contact Us” on www.panasonic.ca FOR PRODUCT REPAIRS, please locate your nearest Authorized Servicentre at www.panasonic.ca: Link : “Servicentres locator” under “Customer support” IF YOU SHIP THE PRODUCT TO A SERVICENTRE Carefully pack and send prepaid, adequately insured and prefer- ably in the original carton.
For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA (7262) or visit Panasonic Web Site: http://www.panasonic.com For assistance in Puerto Rico, call Panasonic Sales Company (787)-750-4300 or fax (787)-768-2910. LIMITED WARRANTY LIMITS AND EXCLUSIONS This warranty ONLY COVERS failures due to defects in materials and workmanship, and DOES NOT COVER normal wear and tear or cosmetic damage.
5770 Ambler Drive, Mississauga Ontario L4W 2T3 PANASONIC PRODUCT LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in materi- als and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Components Operating Instructions (YFM264C099ZA) Product Registration Card Customer Care Plan Main Unit CY-BT200U CY-BT200U Switch Unit (2 m) (ASMYSW100N) Note: ¡ The number in parentheses underneath each accessory part name is the part number for maintenance and service. ¡ Accessories and their part numbers are subject to modification without prior notice due to improvements. Microphone with Bracket (5 m) (L0FBBB000005) Q'ty: 1...
Introduction Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
❑ Installation sample Microphone with Bracket Switch Unit Head unit Main Unit CY-BT200U CY-BT200U...
Glossary Bluetooth ® The Bluetooth word mark and logo are owned by the Bluetooth SIG, Inc. and any use of such marks by Matsushita Electric Industrial Co.,Ltd. is under license. Other trademarks and trade name are those of their respective owners. Bluetooth Bluetooth is a name of the wireless communication technology for the mobile information equipment such as portable PCs,...
Names of Controls and Functions Status indicator (Blue LED) lights: Call waiting/Talking stays out: Not connected blinks rapidly: Receiving a call blinks slowly: Pairing/ Reconnecting [Hang-on] /Blue LED [Hang-up] /Red LED Main unit Switch Unit CY-BT200U CY-BT200U Switch Unit connector Microphone connector To the Switch Unit To the microphone with...
Operating Instructions of the head unit for further information. ¡ Only the latest paired the Bluetooth-ready is usable. ¡ This unit is displayed as “Panasonic BT200” on the screen of the Bluetooth-ready device. ¡ If the displayed device is different from the connected device, the pairing is not successfully completed.
Basic Operation (Bluetooth Audio) The connected Bluetooth-ready device is operable from the head unit. Refer to the Operating Instructions of the head unit for further information. Note: Some audio devices may be inoperable from the head unit. ❑ Track selection  (TRACK): Next track  (TRACK): Preceding track (press twice) Note: Hold down for fast forward/reverse.
Operating Instructions of the head unit for further information. ¡ Only the latest paired mobile phone is usable. ¡ This unit is displayed as “Panasonic BT200” on the screen of the mobile phone. ¡ If the displayed device is different from the connected device, the pairing is not successfully completed.
Microphone positioning Position the microphone appropriately to catch sounds satisfac- torily. The direction of the sun visor may change the volume. Communication test on paired mobile phone Check whether the paired mobile phone is available. (Call to the paired mobile phone.) Volume adjustment (head unit) Note: The volume is adjustable only when receiving calls.
Basic Operation (Hands-Free Kit) Caution ¡ Telephone conversation during driving may result in conse- quences adverse to safety. Follow your local laws and regu- lations. ¡ Appropriately adjust the volume of incoming calls in advance ( Operating instructions of your head unit). This unit is designed only for receiving calls with taking account of safety.
Advanced Operation (Hands-Free Kit) ❑ Calling back A callback call can be made. However, the callback function is disabled after disconnecting Bluetooth communication. (e.g. communication disconnection between the Hands Free Kit with Audio Streaming featuring Bluetooth ® technology and mobile phone, and communication disconnection by turning off the power of the Head unit) Refer to the Operating Instructions of the head unit for further information.
Installation Warning ¡ This installation information is designed for professional installers with knowledge of automobile electrical safety sys- tems and is not intended for non-technical, do-it-yourself indi- viduals. It does not contain instructions on the electrical installa- tion and avoidance of potential harm to air bag, anti-theft and ABS braking or other systems necessary to install this product.
Caution ¡ Make sure that wiring is completed before installation. ¡ Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury.
Wiring Connection between CY-BT200U (this unit) and the head unit Microphone with Bracket e Switch Unit w System-up connecting cable r Head unit (e.g. CQ-VX100U, Option) Main Unit q CY-BT200U CY-BT200U ■ How to disconnect cord with lock Disconnect the cord while pressing the lock section in the arrow direction. ●...
Connection among CY-BT200U (this unit) and two or more devices Head unit (e.g. CQ-VX100U, Option) Microphone with Bracket e Switch Unit w Head unit/Expansion module connection cable (supplied with CY-EM100U) Main Unit q System-up connecting cable r CY-BT200U CY-BT200U iPod Direct Cable for iPod (CA-DC300U, Option) Expansion Module (CY-EM100U, Option)
The Link key of the Bluetooth-ready device is different from that of this unit. ● Try to establish the pairing again. If the pairing was not successfully established, delete “Panasonic BT200” from the pairing list of the Bluetooth-ready device. Possible solution...
Problem There is another wireless device near the unit. ● Switch off the wireless device or keep it away from these Hands Free Kit with Audio Streaming featuring Bluetooth The distance between this unit and the Bluetooth-ready device is too long, or the Bluetooth-ready device is hidden behind a metallic object from this unit.
Troubleshooting ■ Hands-Free Kit Problem CY-BT200U (this unit) cannot receive a call. The hands-free voices accompany the echo or howling. (continued) Possible cause The head unit is set to OFF. ● Turn on the power of the head unit. CY-BT200U (this unit) is set to the disconnection mode. ●...
Problem There is another wireless device near the unit. ● Switch off the wireless device or keep it away from these Hands Free Kit with Audio Streaming featuring Bluetooth The voice quality of The distance between CY-BT200U (this unit) and the mobile phone is too long or too hands-free is low short.
Troubleshooting Problem Talking volume is low or noisy.(claim from the person on the other end of the line) A call-back call cannot be made. (continued) Possible cause Distance between the microphone and the talker is too long or the connection of micro- phone is not proper.
Problem The Switch Unit is disconnected. ● Connect the Switch Unit securely and properly. The power of the Head unit is set to off. The CY-BT200U (this ● Turn on the power of the Head unit. unit) is inoperable. For other than the above ●...
Specifications Power supply :DC 12 V (11 – 16 V), test voltage 14.4 V, negative ground (Supplied from a head unit or a Expansion Module) Current consumption :Less than 1.0 A Communication Frequency :2,402 MHz – 2,480 MHz Number of channels :79 channels Channel width :1.0 MHz...
Note: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product. FCC ID:ACJ932CY-BT100U Canada: License No IC: 216J-CYBT100U...