® Hands-Free Kit featuring Bluetooth ® technology Technologie kit mains libres à caractéristique Bluetooth ® CY-BT100U CY-BT100U Juego de manos libres con tecnología Bluetooth ® CY-BT100U Operating Instructions Manuel d’instructions Manual de Instrucciones ¡Please read these instructions (including “Limited Warranty” and “Customer Services Directory”) carefully before using this product and keep this manual for future reference.
They contain instructions about how to use the sys- from improper connections and operations. The meanings of tem in a safe and effective manner. Panasonic assumes no the pictographs are explained below. It is important that you responsibility for any problems resulting from failure to fully understand the meanings of the pictographs in order to observe the instructions given in this manual.
If the product needs to be repaired, consult specific procedures of battery terminal disconnection. your dealer or an authorized Panasonic Servicenter. ❑ Do not use the unit when it is out of order. FAILURE TO FOLLOW THE PROCEDURE MAY LEAD TO THE...
Safety Information (continued) ❑ If there seem to be something wrong with the sys- Warning tem, park your car in a safe place and identify the ❑ Check for piping, gasoline tank, electric wiring, and abnormality. other items before installing the product. If you need to open a hole in the vehicle chassis to attach or wire the product, first check where the wire harness, gaso- line tank, and electric wiring are located.
For maximum safety, have it installed by your dealer. ❑ This unit is designed for use exclusively in automo- Panasonic is not liable for any problems resulting from your own installation of the unit. biles. ❑ Follow the instructions to install and wire the prod- ❑...
Safety Information (continued) Caution ❑ Do not install the product where it is exposed to strong vibrations or is unstable. Avoid slanted or strongly curved surfaces for installation. If the installation is not stable, the unit may fall down while driving and this can lead to an accident or injury.
The following applies only in the U.S.A. NOTICE This equipment has been tasted and found to comply with Part 15 of the FCC Rules the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide FCC Warning: reasonable protection against harmful interference in a Any unauthorized changes or modifications to this...
Phone (787) 750-4300, Fax (787) 768-2910 8855 Accessory Purchases: Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: email@example.com You may also contact us directly at: 1-800-332-5368 (Phone) 1-800-237-9080 (Fax Only) (Monday-Friday 9 am to 8 pm, EST.)
Fax #: (905) 238-2360 IF YOU SHIP THE PRODUCT TO A SERVICENTRE Email link: “Contact Us” on www.panasonic.ca Carefully pack and send prepaid, adequately insured and prefer- FOR PRODUCT REPAIRS, please locate your nearest Authorized ably in the original carton.
For Carry-In or Mail-In Service in the United States, call 1-800-211-PANA Carolina, Puerto Rico 00985 (7262) or visit Panasonic Web Site: http://www.panasonic.com PANASONIC AUTO PRODUCTS For assistance in Puerto Rico, call Panasonic Sales Company (787)-750-4300 LIMITED WARRANTY or fax (787)-768-2910. LIMITED WARRANTY LIMITS AND EXCLUSIONS LIMITED WARRANTY COVERAGE...
Panasonic Canada Inc. warrants this product to be free from defects in materi- This warranty gives you specific legal rights and you may also have other als and workmanship and agrees to remedy any such defect for a period as rights which vary from state to state.
Introduction Panasonic welcomes you to our constantly growing family of electronic products owners. We endeavor to give you the advantages of precise electronic and mechanical engineering, manufactured with carefully selected components, and assembled by people who are proud of the reputation their work has built for our company. We know this product will bring you many hours of enjoyment, and after you discover the quality, value and reliability we have built into it, you too will be proud to be a member of our family.
❑ Installation sample Microphone with Bracket Switch Unit Head unit (e.g. CQ-C8403U, etc.) Main Unit CY-BT100U CY-BT100U...
Glossary Bluetooth Link key ® The Bluetooth word mark and logo are owned by the Bluetooth This is an up to 16-byte password used for device identification. SIG, Inc. and any use of such marks by Matsushita Electric Entering the same PIN number of the device to be connected Industrial Co.,Ltd.
Main unit Microphone with Bracket Switch Unit Status indicator (Blue LED) lights: Call waiting/Talking stays out: Not connected blinks rapidly: Receiving a call CY-BT100U CY-BT100U blinks slowly: Pairing/ Reconnecting [Hang-on] /Blue LED [Hang-up] /Red LED System-up connector To a Head unit or a port of Expansion...
Note: For the models to be supported, visit the Web Site at: Press and hold the [Hang-on] until the indicator blinks http://www.panasonic.com (Refer to the description regarding slowly (for approximately 2 seconds). Car Audio/AV.) We do not guarantee that all the functions of this unit are...
Microphone positioning Step 4 Enter a pin number “0000” into your mobile phone and connect. Position the microphone appropriately to catch sounds satisfac- Manual of your mobile phone) These actions should be done torily. The direction of the sun visor may change the volume. within 60 seconds, or you may fail to pair.
Basic Operation Note: Caution ¡ Bluetooth connection will make the battery life of mobile phone shorter. ¡ Telephone conversation during driving may result in conse- ¡ Depending upon the mobile phone, the display backlight of a quences adverse to safety. Follow your local lows and regu- mobile phone remains on when ACC is in the ON position.
Advanced Operation ❑ Calling back ❑ Rejection of incoming calls A call-back call can be made. However, the callback function is disabled after disconnecting Press the [Hang-up] to reject an incoming call. Bluetooth communication. (e.g. communication disconnection between the Bluetooth unit and mobile phone, and communica- ❑...
¡ This installation information is designed for professional Main Unit installers with knowledge of automobile electrical safety sys- CY-BT100U CY-BT100U tems and is not intended for non-technical, do-it-yourself indi- Q'ty: 1 viduals. It does not contain instructions on the electrical installa-...
Attach the Main unit q and the Switch Unit w with the Caution double-sided tape t y. ¡ Make sure that wiring is completed before installation. Switch Unit w Main Unit q ¡ Do not install the product where it is exposed to strong vibrations or is unstable.
Wiring Connection between the Hands-Free Kit featuring Bluetooth ® technology and head unit Microphone with Bracket e Main Unit q Switch Unit w System-up connecting cable r Head unit (e.g. CQ-C8403U, Option)
Connection among the Hands-Free Kit featuring Bluetooth ® technology and two or more devices Head unit (e.g. CQ-C8403U, Option) Head unit/Expansion module connection cable (supplied with CY-EM100U) Microphone with Bracket e Main Unit q System-up connecting cable r Switch Unit w iPod Expansion Module (CY-EM100U, Option)
Please refer the checking and the consult your dealer. repair to professionals. Panasonic shall not be liable for any ¡ Never try to repair the unit by yourself because it is dan- accidents arising out of neglect of checking the unit or your gerous to do so.
Problem Possible cause Possible solution There is the other wireless equipment near the unit. ● Switch off the other wireless equipment or keep it away from these bluetooth units. The mobile phone (or main unit) is touched or covered by metal objects. Or the mobile phone is hidden or far from the main unit.
Troubleshooting (continued) Problem Possible cause Possible solution The head unit is set to OFF. ● Turn on the power of the head unit. The Hands-Free Kit featuring Bluetooth ® technology is set to the disconnection mode. ● Cancel the disconnection mode. The Hands-Free Kit Your mobile phone is out of service area.
Problem Possible cause Possible solution There is another wireless device near the unit. ● Switch off the wireless device or keep it away from these bluetooth units. Distance between the Hands-Free Kit featuring Bluetooth ® technology and the mobile The voice quality of phone is too long or by contraries, too short.
Troubleshooting (continued) Problem Possible cause Possible solution Distance between the microphone and the talker is too long or the connection of micro- phone is not proper. Talking volume is low ● Make the microphone closer to the talker. Or connect the microphone’s connector or noisy.
Problem Possible cause Possible solution The Switch Unit is disconnected. ● Connect the Switch Unit securely and properly. The Hands-Free Kit The power of the Head unit is set to off. featuring Bluetooth ® ● Turn on the power of the Head unit. technology is not For other than the above feasible.
Specifications Power supply : DC 12 V(11 – 16 V), test voltage 14.4 V, negative ground (Supplied from a head unit or a Expansion Module) Current consumption : Less than 1.0 A Communication Frequency : 2 402 MHz – 2 480 MHz Number of channels : 79 channels Channel width...
Note: ¡ Specifications and design are subject to modification without notice due to improvements. ¡ Some figures and illustrations in this manual may be different from your product. FCC ID:ACJ932CY-BT100U Canada: License No IC: 216J-CYBT100U...
Panasonic Consumer Panasonic Sales Company, Panasonic Canada Inc. Electronics Company, Division of Panasonic Puerto 5770 Ambler Drive, Division of Panasonic Rico, Inc. (“PSC”) Mississauga, Ontario Corporation of North America Ave. 65 de Infanteria, Km. 9.5 L4W 2T3 One Panasonic Way, Secaucus, San Gabriel Industrial Park, http://www.panasonic.ca...