Entering Metadata - Focus FS-5 User Manual

Entering Metadata

This procedure assumes that there is a ready to use template, for
instance the
FCP Example
necessary to modify it or create a new one.
Use the following steps to enter metadata during either record or
playback modes.
1. Open the metadata function using a web browser and the FS-5
web-based interface.
Initially, the
2. Select the
3. Begin to record or playback.
The fields of the selected metadata template appear on the
page.
Entry
4. Enter data into the metadata fields.
The type of data entered depends on the type input allowed by
the field: variable, predefined, and mixed.
5. Click
Update
6. Set timecode markers.
It may be necessary to set markers to indicate the location of a
particular frame or sequence of frames in the video clip. The
names of the markers depends on the template used and the
template type. Generally, there is an In (Start) maker for the
beginning and an Out (Stop) for the end of the selection.
supplied with the FS-5, and that it is not
page is empty.
Entry
to use.
Template
.
FS-5 Portable HD/SD DTE Recorder
Metadata
2
2a
53