Connecting Fs-5 To Dv/Hdv Camcorder - Focus FS-5 User Manual

Connecting FS-5 to DV/HDV Camcorder

Before performing this procedure, make sure you have installed and
charged the battery, see
20.
1. Connect the supplied Firewire, 1394, cable to the DV I/O
connector on the top of the FS-5.
1. Locate the FireWire/DV/iLink (or similar) connector on your
video camera. It is located in different places depending upon the
brand of camera. If you are unclear of its location, consult your
video camera manual.
FS-5 Supplied with 6-pin to 4-pin FireWire Cable
Some camcorders require a 6-pin to 6-pin FireWire, IEEE 1394,
cable and the cable provided with the FS-5 will need to be
replaced.
2. Connect the other end of the FireWire, IEEE 1394, cable to the
video camera.
3. Turn on the camera.
4. Turn on the FS-5.
Installing / Removing the Battery Pack
FS-5 Portable HD/SD DTE Recorder
Quick Start
on page
23