Low Battery Power During Operation; Power From External Dc Battery Devices; Power Consumption Tables - Focus FS-5 User Manual

Battery Use
Misuse can damage unit and/or cause injury such as burns if
a conductive material like jewelry, keys, or beaded chains
touch exposed terminals. Conductive material may complete
an electrical circuit (short circuit) and become very hot. Use
care in handling charged battery, particularly when placing it
inside a pocket, purse, or other container with metal objects.
Warning: Do Not Use Unapproved Battery Chargers
Use of battery chargers not approved by Focus
Enhancements could cause the battery to catch fire or
explode.

Low Battery Power During Operation

If during operation, the FS-5 senses that the battery charge is low
resulting in a low voltage condition, the unit alerts the user with
warning beeps and then powers down in an orderly manner,
protecting the stored video clips and metadata.

Power From External DC Battery Devices

The ability to charge the FS-5 battery when operating using an
external DC battery device is dependent on the load placed on
the FS-5.
Consider the following when using external DC battery devices
to power the FS-5. The typical external DC video device is 12V or
14.4V.

Power Consumption Tables

No Battery Installed - no charging current
Volt- in No Dongle
14.4 V 0.238A (3.42W)
12.0V 0.285A (3.42W)
with Linksys Dongle
0.328A (4.72W)
0.398A (4.77W)
FS-5 Portable HD/SD DTE Recorder
Quick Start
Notes
idle-LCD/Backlight
at max
idle-LCD/Backlight
at max
21