Assigning Clips To Reels - Focus FS-5 User Manual

FS-5 Functions

Assigning Clips to Reels

When a disk is formatted, the FS-5 creates 10 folders, numbered 0-
9, on the disk. Each folder is a
reels/folders 0 - 9 can be created within each of the original reels.
For example: REEL 1 has a sub REEL 2 which is designated 1-2.
Reels can be assigned to a clip during record, stop, or playback.
The function keys can be set to assign video clips to particular reels
(folders). There are two functions for assigning clips to reels:
• REELS
To allocate a clip to one of the folder/reels
function to a function key.
REELS
To Select the reel that the clip should belong to, press the
function key to increments the reel that the current clip
REELS
is assigned to. The number of the reel appears in the lower
left-hand area of the display, just above the functions bar.
Example
In the illustration above,
videographer wants to assign the current clip to Reel 2 has
pressed the F2 key until the FS-5 to mark the clips to the
currently selected reel. The current reel is indicated in the line
the F1 function reel selection.
above
FS-5 Portable HD/SD DTE Recorder
112
Current Reel
F2 Assigned to REELS
. Optionally, another set of
REEL
assigned to
F2
Function Bar
F4 Assigned to R3-3
F3 Assigned to R1-1
- assign the
0 9
. The
REELS