FS-5 with Other Devices
FS-5 to Wired (Ethernet) Network
This procedure requires the use of a USB 2.0 to Ethernet Extender.
1. With the FS-5 powered off, use an USB 2.0 to Ethernet
Extender to connect the FS-5 to the network.
2. Power on the FS-5 and wait for the Home screen to appear.
3. Go to the
If the network employs DCHP, the
IP MASK
assigned addresses.
4. Open an IE or Safari web browser.
5. Enter the FS-5's
and enter.
The FS-5
FS-5 and FTP
To access the FS-5 via FTP, follow the same steps above.
In Step 5, enter the address
from
SETUP
FS-5 to a Managed Wireless Network
A managed wireless network employs a wireless router to manage
connected Wi-Fi devices. The router provides DHCP services the
network in a way similar to the DHCP server on a wired network.
Setting up the FS-5 is similar to that of attaching the FS-5 to the
ethernet network mentioned before. There are a few items to note:
• Verify that FS-5 is set to DHCP.
SETUP > NETWORK > DHCP
• Insure that the proper
SETUP > NETWORK > ESSID
• Insure that the
The
KEY
SETUP > NETWORK > KEY
FS-5 Web and FTP
Like the wired network, the FS-5 can be accessed by web
browser or FTP.
FS-5 Portable HD/SD DTE Recorder
130
menu and locate
SETUP
,
, and
BROADCAST
IP ADDR
web page opens.
Templates
.
ESSID
is set.
KEY
is the wireless network password.
IP ADDR
SETUP
display the network
GATEWAY
into the browser's IP address bar
and then the
ftp://FS.FS@
.
set,
.
.
.
options
IP ADDR
IP ADDR
,