Power - Focus FS-5 User Manual

Power

• Main unit:
11 – 18V DC,
Low power consumption. less than 3W during record,
• External control panel:
Low power consumption,
Powered via TRRS serial connector from main unit (future
option)
• Removable and rechargeable Li-Ion battery pack:
Capable of more than 3 hours of continuous record operation,
Battery charger built into the unit,
• Supplied external AC adapter with restraining mechanism,
• Accept/receive power via USB 2.0 port:
Maximum 2.5W (500mA),
Operation Only - Does Not Charge Battery,
• Power From External DC Battery Devices
The ability to charge the FS-5 battery when operating using an
external DC battery device is dependent on the load placed on
the FS-5.
Consider the following when using external DC battery devices
to power the FS-5. The typical external DC video device is 12V or
14.4V.
Power Consumption Tables
No Battery Installed - no charging current
Volt- in
14.4 V
12.0V
Battery Installed - partially discharged, full charging current
Volt- in
14.4 V
14.4 V
FS-5 Portable HD/SD DTE Recorder
160
No Dongle
0.238A (3.42W)
0.285A (3.42W)
No Dongle
NA
0.525A (7.6W)
with Linksys Dongle
0.328A (4.72W)
0.398A (4.77W)
with Linksys Dongle
0.608A (8.75W)
0.575A (8.25W)
Notes
idle-LCD/Backlight at
max
idle-LCD/Backlight at
max
Notes
Record Mode-LCD/
Backlight at max
record for 1 hr.,
internal T=56 deg.C