Matrix mvBlueFOX3 Technical Manual page 360

mvLUTMapping
Feature Name
TestControl
TestPendingAck
TestEventGenerate@i
Feature Name
TransportLayerControl
PayloadSize
mvU3VPHYErrorCount 0
mvU3VLNKErrorCount 0
352
20 Appendix A.1 Pregius CMOS specific camera / sensor data
map_10To10,
- - -
map_10To9
Min
0 INT_MAX
- -
Min
INT_MIN INT_MAX
INT64_MAX 1
INT64_MAX 1
Bayer: The LUT is operating on raw
Bayer data (i.e. before debayering)
RGB: The LUT is operating on RGB data
(i.e. after debayering)
Describes the mapping of the LUT
map_10To10: The LUT maps 10 bit input
data to 10 bit output data.
map_10To9: The LUT maps 10 bit input
data to 9 bit output data.
Max Inc
Values
1 -
- -
Valid
Max Inc
Values
1 -
-
-
Valid
Documentation
A category for Test
Control features.
Tests the device's
pending acknowledge
feature. When this
feature is written, the
device waits a time
period corresponding
to the value of
TestPendingAck
before acknowledging
the write. (ms)
Generates a Test
Event.
Documentation
Category that contains the
transport Layer control
features.
Provides the number of
bytes transferred for each
image or chunk on the
stream channel. This
includes any end-of-line,
end-of-frame statistics or
other stamp data. This is the
total size of data payload for
a data block.
Counts the number of errors
on the PHY interface.
Counts the number of errors
on the USB3 link.