Installation Guidelines - Tannoy Definition DC6i User Manual

INSTALLATION GUIDELINES

SURFACE MOUNTING THE LOUDSPEAKERS:
1. Lay the loudspeaker cable from the amplifier
to the location where you intend to surface
mount the loudspeaker.
2. Terminate the loudspeaker cable with 4mm
connectors or spade connectors.
Connect the loudspeaker to the approipriate
amplifer channel.
The positive terminal on the amplifier channel
(marked + or coloured red) must be connected
to the positive terminal on the loudspeaker
(coloured red).
The negative terminal on the amplifier channel
(marked - or coloured black) must be connected
to the negative terminal on the loudspeaker
(coloured black).
3. Attach the bracket plate to the wall using
appropriate fixings (Please consult the safety
notes section of this user manual). See Fig 1.
4. Offer the loudspeaker up to the bracket.
The speaker can be installed either landscape
or portrait.
5. Attach the loudspeaker to the bracket by
slotting the two bracket posts into the
appropriate bracket insert points on the rear of
the loudspeaker then lowering the loudspeaker
down to allow it to lock onto the bracket.
See Fig 2.
Fig 1.
Fig 2.
4