Nortec UL10 Operation Manual page 27

CHARGER / DISCAHRGER UL10
Note:
The lead acid batteries consist, as a rule, of several batteries each with 2 V voltages.
The following are standard:
The device approves the input of the data as multiples of 2.0 V, otherwise the data are rejected as
false.
The input voltage is confirmed by hitting ENTER↵. The LED reads:
Input of parameters
nominal capacity
The nominal capacity in Ampere/hours (Аh) characterizes the physical value of an individual battery
that determines the current magnitude to which it is possible to charge or discharge it. The label can
also have an indication of power. Depending on the input of discharge current magnitude the batte-
ries of a similar design can be discharged to different powers. The following rule applies: the higher
the selected discharge current the lower is the output power of the battery.
The aircraft lead acid batteries are often designed for a 5-hour discharge.
The capacities of other batteries are calculated depending on their application and the effective
standard of discharge current within a range 10 to 100 hours. This is provided for the types of batte-
ries in the memory. After the capacity is input (with steps of 0.1 Аh) it is confirmed by hitting
ENTER↵ and the start menu appears:
(0) the device returns to the main menu to select:
•
the battery type and
• the operation type
26
•
the battery 2 V
•
the battery 6 V
•
the battery 12 V
•
the battery 24 V
P 420:
P 410: PARAMETER INPUT
1 = START P = WITH PRINT 0 = NEW
PARAMETER INPUT
RATED CAPACITY
OPERATION MAUNAL
000.0Ah
© NorTec Electronics 2014