Connecting Three Monitors - Matrox TripleHead2Go Analog Edition User Manual

Connecting three monitors

Connection overview
Step-by-step connection setup
Turn off computer
1
Before you connect your Matrox product, make sure you shut down your system and turn off
your computer.
Attach the Matrox input cable
2
Attach one end of the cable provided with
your Matrox product to the connector on
your computer. Attach the other end of the
cable to the connector labeled
your Matrox product.
If your graphics hardware has an HD-15
connector, use the Matrox HD-15 to HD-15
cable to connect your Matrox product.
8 Matrox TripleHead2Go – User Guide
on
INPUT
Matrox input cable
(HD-15 to HD-15)