Connecting two TripleHead2Go products
Connection overview
Step-by-step connection setup
To connect a second TripleHead2Go product, repeat the
product.
In step 3, when attaching the Matrox input cable, attach one end of the input cable either to another
connector on your graphics card or to a connector on a second graphics card installed in your system.
Attach the other end of the cable to the input connector on your second TripleHead2Go product.
28 Matrox TripleHead2Go – User Guide
(TripleHead2Go DP Edition shown)
"Step-by-step connection setup"
for your