Running The Matrox Setup Wizard - Matrox TripleHead2Go Analog Edition User Manual

Installing your Matrox PowerDesk software
Note:
product is set as your primary display and your computer's flat panel monitor is set as your
secondary display before installing your Matrox software. Otherwise, your Matrox
software won't install. For more information on enabling your displays, see your graphics
hardware documentation.
Insert the Matrox CD-ROM in your CD-ROM drive, then follow the on-screen instructions.

Running the Matrox setup wizard

Note:
TripleHead2Go DP Edition products.
Run the setup wizard to guide you step-by-step through the process of setting up your
Matrox product. The setup wizard launches automatically after you install your PowerDesk
software. To configure a new product, select
on-screen instructions.
If the setup wizard doesn't launch automatically, you can start it manually by clicking
All programs
30 Matrox TripleHead2Go – User Guide
Windows 2000 – If you're using a laptop computer, make sure your TripleHead2Go
The Matrox setup wizard is available only on TripleHead2Go Digital Edition and
Matrox Graphics
Set up a new Matrox product
.
Start setup wizard
, then follow the
Start