Panasonic VDR-M50PP User Manual page 154

Message
Control Information
Error.
COPY PROTECTED
DISC ACCESS
DISC ALMOST FULL
Disc error has occurred.
Finalizing is not
complete.
Disc error has occurred.
Format the disc now?
Disc error has occurred.
Formatting is not
complete.
Disc error has occurred.
Keep disc inside &
restart.
Disc error.
"DISC ERROR" appears
when an attempt to
release write-protect is
made.
154
Cause & Troubleshooting
Mismatch may occur between the recorded image and scene
information.
Update the control information.
•
Use another disc.
•
See *3 on page 157.
The video signal input to this DVD Video Camera may be copy-
guarded.
Some prerecorded video materials, such as movies, are guarded
against copying.
Copy-guarded materials cannot be recorded on this DVD Video
Camera.
The recorded scene is being stored on disc.
Wait until the message disappears, and you can start to use the
DVD Video Camera.
This DVD Video Camera is verifying whether the correct disc has
been inserted.
Wait until the message disappears, and you can start to use the
DVD Video Camera.
This message will be displayed for a little longer when the date
changes.
The disc will soon be full, and recording will be impossible.
Delete unnecessary scenes and try the disc again, or use another
disc.
•
Disc error occurred during finalizing, and finalizing failed.
Replace the disc.
•
See *3 on 157
•
Has the disc been initialized on PC? Has initializing the disc on
PC been interrupted?
Choose "YES" and initialize the disc when using it on this DVD
Video Camera. Initializing the disc will erase all data on it.
•
See *2 on page 157.
The disc may be dirty.
Remove the disc and wipe off fingerprints, dust, etc. before reusing
it, or use another disc.
This message may also appear if you insert a disc for which
formatting was interrupted midway. In this case, use another disc.
Disc error could have occurred during editing of scenes.
Turn off the DVD Video Camera with the disc being used in it,
connect AC adaptor, and then power the DVD Video Camera again.
Repair of scenes will be tried.
•
Use another disc.
•
See *3 on page 157.
•
Mismatch in recording information may be caused by editing
done on some device other than this DVD Video Camera.
Initialize the disc or use another disc.
•
Initializing the disc will erase all data on it.
If you have write-protected a disc using the write-protect setting tool
(WPTOOL) that is equipped with the DVD-RAM driver contained on
the CD-ROM provided with this DVD Video Camera, you cannot
release the write-protect on this DVD Video Camera as is. Use the
write-protect setting tool on PC to release the write-protect.
Reference
page
126
28, 74
75
51, 52

32, 33,101
127
125
74, 125
45
28, 74
125
