Using External Microphone; Setting Video Flash (Only For Vdr-M70Pp) - Panasonic VDR-M50PP User Manual

Using External Microphone

Connect external microphone (optional-user provided) to the external microphone jack of this DVD Video Camera.
Clearer sound can be recorded. Turn on the switch on microphone and start recording. For details on microphone,
see "Major Specifications" on page 165.
:
Note
This DVD Video Camera cannot use a plug-in power type microphone (power supplied from Video Camera).

Setting Video Flash (Only for VDR-M70PP)

(See "Introduction to Optional Accessories" on page 145)
When recording stills in a dark place, or the subject is lit
from rear, it is recommended that you use the optional
VW-FLH3 Video Flash* (P. 145): Refer to the
instruction manual of Video Flash for use.
Setting of On-screen
Video Flash information
AUTO
ON
OFF
* Unusable on VDR-M50PP.
68
To external
microphone jack
A/V
MIC
Manner of
emitting light
Automatically
A
emits light in dark
place or in a place
lit from rear.
Always emits light
regardless of
brightness.
No light emission.
:
Note
•
The DVD Video Camera automatically sets the shutter
speed between 1/800 and 1/30 second (between 1/800
and 1/10 second if Program AE has been set to Low
Light) depending on subject brightness (
•
When you use Video Flash with AUTO mode, "
always be displayed.
•
An aim of an available range of Video Flash is about
1 - 4 m.
•
See "Switching Quality of Still Image (Quality)" on
page 87 if you want to change the still quality mode.
•
However, dark subjects may not be in clear focus even if
the Video Flash is used. It is recommended that you
illuminate a subject when recording in a dark place.
•
When you use accessories for hot shoe, the power is
supplied by this DVD Video Camera.
13
P. 80
).
( A
" will