Formatting An Sd Card (Vdr-D200 Only) - Panasonic Palmcorder VDR-D100 Operating Instructions Manual

Formatting discs and cards

Formatting an SD card (VDR-D200 only)

This is for initializing cards.
Please be aware that if an SD card is formatted, then all the data recorded on the card will be
erased. Store important data on a computer, etc.
¬ Rotate the mode dial to select
1 Press the MENU button, then select [
FORMAT CARD] # [YES] and press the joystick.
[
2 When the confirmation message appears, select [YES], then press the
joystick.
≥ When formatting is complete, press the MENU button to exit the message screen.
≥ During formatting, do not turn this unit off.
≥ When you format the SD card, use a battery with
sufficient battery power or the AC adaptor.
≥ Use this unit to format SD cards. If an SD card is
formatted on other products (such as a computer),
the time spent for recording may become longer
and you may not be able to use the SD card.
84
LSQT0969
.
SETUP] #
≥ Depending on the type of SD card being used, it
may take time to format.
≥ Do not remove the SD card while formatting.
(SD)