To Set The White Balance Manually - Panasonic Palmcorder VDR-D100 Operating Instructions Manual

To set the white balance manually

Select [ ] mode, fill the screen with a white subject
and then move the joystick up to select [
When the [ ] display changes from flashing to on, setting is complete.
≥ When the [ ] display continues flashing green, the white balance
cannot be set because the place is dark etc. In this case, use the
automatic white balance.
∫ About the white balance sensor A
The white balance sensor detects the type of light source during
recording.
Do not cover the white balance sensor during recording, or it may
not function properly.
≥ When the [ ] display flashes white, the manual
white balance previously adjusted is stored.
Whenever recording conditions change, re-set the
white balance for correct adjustment.
≥ When the unit is turned on with the lens cap fitted,
the automatic white balance adjustment may not
function properly. Please turn the unit on after
removing the lens cap.
Manual recording functions
].
≥ When setting both the white balance and the iris/
gain, set the white balance first.
MNL
A
59
LSQT0969