Checking The Connections - Panasonic SDR-SW20PC Operating Instructions Manual

With a
computer
Connect this unit and a computer with the USB cable (supplied). (P.76)
Display the Device Manager.
For Windows 2000
Click [Start]
[Device Manager] button.
For Windows XP
Click [Start]
[System]
Manager] button.
For Windows Vista
From the Start menu, select [Control Panel]
[System]
If a confirmation window appears halfway through, click the [Continue]
button.
When the driver is recognized
[USB Mass Storage Device] appears in [Universal Serial Bus controllers].
(The display differs according to the type of computer.)
When the driver is not recognized
[!] or [Unknown device] appears in [Universal Serial Bus controllers] or [Other
devices].
Try the following.
• Method [1] : Turn off the unit and your computer once and turn on again to
• Method [2] : Remove the SD card from the unit and insert it back into the
• Method [3] : Connect the USB cable to another USB port on the computer.
If the driver cannot be recognized by any of the methods above, contact the
computer manufacturer.
80
VQT1M21
7

Checking the connections

[Settings] [Control Panel]
[Control Panel]
[Hardware] tab in the [System Properties] window
[Device Manager] (from the [Task] window).
reconnect.
unit.
[System]
[Performance and Maintenance]
[System and Maintenance]
[Hardware] tab
[Device