8
With a
Checking the connections
computer
Connect this unit to a computer using the USB cable (supplied). (P.76)
Display the Device Manager.
●
For Windows 2000
Click [Start] → [Settings] → [Control Panel] → [System] → [Hardware] tab
→ [Device Manager] button.
●
For Windows XP
Click [Start] → [Control Panel] → [Performance and Maintenance] →
[System] → [Hardware] tab in the [System Properties] window → [Device
Manager] button.
●
For Windows Vista
From the Start menu, select [Control Panel] → [System and Maintenance]
→ [System] → [Device Manager] (from the [Task] window).
If a confirmation window appears halfway through, click the [Continue]
button.
When the driver is recognised
[USB Mass Storage Device] appears in [Universal Serial Bus controllers].
(The display differs according to the type of computer.)
When the driver is not recognised
[!] or [Unknown device] appears in [Universal Serial Bus controllers] or [Other
devices].
Try the following.
•
Method [1] : Turn off the unit and your computer once and turn on again to
reconnect.
•
Method [2] : Remove the SD card from the unit and insert it back into the
unit.
•
Method [3] : Connect the USB cable to another USB port on the computer.
●
If the driver cannot be recognised by any of the methods above, contact the
computer manufacturer.
82
LSQT1438
9
Connecting to a Macintosh
With a
computer
computer
Operating environment required for external drives
Operating environment for the card reader function (Mass storage)
Supported
Macintosh
computers
OS
Mac OS X v10.4, Mac OS X v10.5
CPU
PowerPC G5 1.9 GHz or higher
Intel
Core™ Duo, Intel
®
Interface
USB port
●
Even if the system requirements mentioned in these operating instructions are
fulfilled, some personal computers cannot be used.
●
The USB equipment operates with the driver installed as standard in the OS.
Connecting the unit to a computer
Connect this unit to a computer using the USB cable
(supplied). (P.76)
An icon labeled [NO_NAME] or [Untitled] appears on the desktop.
Copying still pictures to computers
Double click the [NO_NAME] or [Untitled] icon on the desktop.
The still pictures are in the [100CDPFP] folder inside the [DCIM] folder.
Drag and drop the still pictures to copy onto the computer.
Disconnecting the unit
Drag and drop the [NO_NAME] or [Untitled] icon to the Trash.
Disconnect the USB cable (supplied) from the computer.
●
Apple, Mac OS are registered trademarks or trademarks of Apple Inc. in the
United States and/or other countries.
●
PowerPC
is a trademark of International Business Machines Corporation.
®
●
Intel
Core™ is registered trademarks or trademarks of Intel Corporation in the
®
United States and/or other countries.
●
Other names of systems and products mentioned in these instructions are
usually the registered trademarks or trademarks of the manufacturers who
developed the system or product concerned.
Core™ Solo
®
LSQT1438
83