Panasonic SDR-SW20PC Operating Instructions Manual page 91

Problem
The display
changes suddenly.
Indications
(remaining pictures,
elapsed time, etc.)
do not appear on
the LCD monitor.
Pictures cannot
be recorded even
though the SD card
is properly inserted.
Motion picture
recording stops on
its own.
Still pictures come
out like mosaics.
The unit does not
focus automatically.
Audio is not output.
What to check
If the demo (camera introduction) video starts, set
[DEMO MODE] to [OFF]. (P.84)
When [DISPLAY] of the [SETUP] menu is set to
[OFF], indications other than warnings and the date
do not appear.
Is the SD card write-protected? (P.21)
Is the SD card full? Either delete unnecessary
scenes or insert a new card. (P.56)
Is the unit in a recording mode?
Is the card/battery door open?
Are you using an applicable SD card? (P.20)
Even with applicable SD cards, recording may stop
when using an SD card on which data has been
written many times.
Copy the data to a computer, then format the SD
card on this unit. (Formatting deletes all data on the
SD card.)
When [PICT. QUALITY] is set to [
subjects are recorded, pictures come out like
mosaics. Set to [ ] when recording. (P.37)
Is the unit set to manual focus? Press the [AUTO]
button to set auto focus.
Are you recording a scene that is hard to focus
automatically?
Focus the subject manually. (P.44)
Is the volume set low? (P.52)
] and detailed
91
VQT1M21