Automatic Recording (Motion Pictures) - Panasonic SDR-SW20PC Operating Instructions Manual

Recording
To change aspect ratio to 4:3
[ASPECT] [4:3]
Default aspect ratio at the time of
purchase is set to 16:9 (widescreen).
To remove sound when record
button is pressed
[BEEP SOUND] [OFF]
To remove on-screen display
[DISPLAY] [OFF]
When the unit is running on battery power, power is automatically shut OFF
to conserve battery life if no operations are performed for about 5 minutes. To
reuse the unit, set the mode dial to [OFF] and then reselect a mode.
To prevent power from shutting OFF automatically: (P.84 [POWER SAVE])
The interval between starting and stopping recording is recorded as one single
scene. The counter is reset to "0h00m00s" after each scene.
At the time when the unit is purchased, the audio recording mode is set to
[DOLBY]. For playback in a device which does not support Dolby Digital, set
[AUDIO REC] to [MPEG]. (P.84)
34
VQT1M21
2
Automatic recording
(motion pictures)
[ADVANCED]
[SETUP]
[SETUP]
Set to [ ].
1
2
Press
Start recording.
3
Recording
mode
Time remaining (flashes
red when under 1 minute)
Recording continues even if the
LCD monitor is closed.
Stop recording.
4
Paused (green)
The unit is still recording if [ ] is
red. Do not move the unit.
.
Time elapsed
Recording in
progress (red)