Printing Pictures From Pictbridge Printers - Panasonic SDR-SW20PC Operating Instructions Manual

With other
products
Connect the unit and AC adaptor (P.22), and set the mode dial to a setting
other than [OFF].
Connect the unit and printer with the USB cable (supplied).
Insert the plugs as far as they will go.
Number of
copies (Max. 9)
Do not use any other USB connection cables except the supplied one.
(Operation is not guaranteed with any other USB cables.)
Connect the unit directly to the printer without going through a USB hub.
For paper size and print quality, etc., check printer settings.
Avoid the following operations during printing. Otherwise, pictures will not print
correctly:
• Disconnecting the USB cable
• Opening the card/battery door
• Rotating the mode dial
• Shutting off power
62
VQT1M21
3
Printing pictures from
PictBridge printers
Select [PictBridge].
Select the still pictures to print.
Set the number of copies.
• To not print the picture, set "0".
• Repeat steps
pictures for printing.
and to select up to 8 still