Front Panel Facilities - Pioneer SX-700L Service Manual

2. FRONT PANEL FACILITIES
O poweR swtrcH
When this switch is set to ON position. power is supplied
to the receiver's main circuits. The unit's power switch is
geared to selecting the transformer,s secondary and
so
even at STAND-BY position, the unit,s circuitry will work
as long as the power cord is connected to the power out_
let. For this reason, the programmed broadcasting stations
will not be erased.
Disconnect the power cord from the power ouilet when
you do not plan to use the unit for a long period
of time.
When it has been disconnected, the broadcasting stations
remain programmed for about 3 days.
@ F M S T E R E O I N D I C A T O R
This indicator lights up when receiving
an FM stereo
program.
@ S I C r u A L M E T E R / P R E S E T F R E O U E N C Y
D I S P L A Y M E T E R
@ ueuoRy swtrcH
This is depressed to preset a broadcasting
station in a
preset switch (memory operation).
When presettang the
f requency of a station in one of the preset
switches,
depress the preset switch with this switch in
the depressed
p o s i t i o n .
€ ) D | A L P O T N T E R
This pointer indicates the broadcasting stations.
@ pReser swtrcHEs
Depress these switches when calling out preset
broad_
casting stations and when presetting these stations.
When
one of the switches is depressed, it lights and it remains
l i g h t e d d u r i n g c a l l - o u t .
One switch can be used to preset one FM station and
one
LW or MW station. To call out the preset station, first
set
the function selector to the frequency band and
then
depress the preset switches. The broadcasting
station can
be checked by the position of the pointer on
the preset
frequency display meter.
Depress one switch onfy to call out a station.
lf two or
more switches are depressed simultaneously, the
broad-
casting station may not be called
out.
O MANUAL swtrcH
This switch is depressed when tuning in
a station with
the tuning knob. When it is depressed when
changing from
preset tuning to manual tuning,
the preset switch light
goes off and the dial pointer lights.
NOTE:
When one of the preset switches is depressed.
it is not possible to
tune in a station using the tuning knob.
lwhen the diat pointer
illuminatîon
goes off, it means that tuning
is not possible with
the tuning knob.)
I